home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19950528-19950726
/
000387_news@columbia.edu_Tue Jul 18 16:45:35 1995.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA28078
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Tue, 18 Jul 1995 12:45:43 -0400
Received: by apakabar.cc.columbia.edu id AA12281
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Tue, 18 Jul 1995 12:45:40 -0400
Path: news.columbia.edu!watsun.cc.columbia.edu!pepmnt
From: pepmnt@watsun.cc.columbia.edu (John Chandler)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: Sending remote commands via KERMIT
Date: 18 Jul 1995 16:45:35 GMT
Organization: Columbia University
Lines: 15
Message-Id: <3ugoff$bvl@apakabar.cc.columbia.edu>
References: <3uehuu$r5m@solaria.mil.wi.us>
Nntp-Posting-Host: watsun.cc.columbia.edu
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <3uehuu$r5m@solaria.mil.wi.us>,
Rob Radvanovsky <helix@solaria.sol.net> wrote:
>I would like to be able to tie into a given system, initiate a log
>capture, then send commands once connected to a remote system. The target
>system does not have KERMIT, so I would like to find a (relatively) easy
>method for such a process.
This all sounds very routine. I guess I don't understand the problem.
You can issue the CONNECT command to your local Kermit after tying in,
and you will be "talking" directly to the remote system. If you have
LOG SESSION in effect, the traffic will be recorded. You can even
automate the login process as well as the remote commands by writing an
appropriate macro or two. It doesn't matter at all that the remote
system has no Kermit, as long as you don't need to transfer any files.
John Chandler